KMF Profile Selection

(Data Profiles, Network Layer Security)

Selects the Secure KMF Profile to be associated with the current Trunking - Data Profile. Secure encrypted Packet Data is transmitted within the Network Layer (Layer Three) of the OSI (Open Systems Interconnection) Seven Layer Model for layered communications.

This field is invalid when the selected Secure KMF Profile's - KMF IP Address field is set to "0.0.0.0".

When this field is not set to "Disabled", the Key Select field for the current Data Profile can only select keys from the Secure Hardware Encryption Key References List of this selected Secure KMF Profile.

Be aware that the CPS is actually pointing to the Keys of the Encryption Key List for this selection; individual Keys from the Secure Hardware Encryption Key References List reference the Encryption Key List's Keys from the Hardware Key Reference field. Therefore any key selected when ASTRO OTAR is enabled, must first be defined in the Secure Hardware Encryption Key References List.

When this field is set to "Disabled", the Key Select value for the current Data Profile is directly chosen from the Secure Wide Window's Encryption Key List.

When the Data Profile Type is set to "Trunking" or Trunking & Broadband", and

when the Secure / Clear Strapping field is applicable and set to "Secure", and

when the radio is model / option capable.

SELECTIONS:

DEFINITIONS:

Disabled

See Important Note above.

Available Secure KMF Profiles

Secure KMF Profile selections apply only:

when the Secure Wide's OTAR Enable field is enabled, and

when the Secure Wide's ASTRO OTAR Enable field is enabled.

Go to the Network Layer Security Page